[A51] Cracks beginning to show in A5/1...

Andy Fuji andyfuji88 at gmail.com
Thu Jan 2 02:48:52 CET 2014


Hi,
to run Kraken, we should follow these steps:
1- edit conf file
2- execute Behemoth.py to generate index tables
3- run Kraken
What have you done before running Kraken?

Regards,
Andy

On Tue, Dec 31, 2013 at 11:51 AM, demian sims <demiansims at gmail.com> wrote:

> Ok when I run ./kraken ../indexes I get the following error:
>
> Device: /dev/sda1 10
> /dev/sda1
> Device: /dev/sdb1 10
> /dev/sdb1
> Device: /dev/sdd1 10
> /dev/sdd1
> kraken: NcqDevice.cpp:15: NcqDevice::NcqDevice(const char*): Assertion
> `mDevice>=0' failed.
> Aborted
>
>
> When I run fdisk -l I get the following output:
>
>    Device Boot      Start         End      Blocks   Id  System
> /dev/sda1   *        2048    40136703    20067328   83  Linux
> /dev/sda2        40138750    41940991      901121    5  Extended
> /dev/sda5        40138752    41940991      901120   82  Linux swap /
> Solaris
>
> WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk
> doesn't support GPT. Use GNU Parted.
>
>
> Disk /dev/sdb: 2000.4 GB, 2000365289472 bytes
> 255 heads, 63 sectors/track, 243197 cylinders, total 3906963456 sectors
> Units = sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 512 bytes
> Disk identifier: 0x00000000
>
>    Device Boot      Start         End      Blocks   Id  System
> /dev/sdb1               1  3906963455  1953481727+  ee  GPT
>
>
>
> On Mon, Dec 30, 2013 at 4:17 AM, Andy Fuji <andyfuji88 at gmail.com> wrote:
>
>> Hi,
>> your command line should be "#./kraken ../indexes". The second parameter
>> must be point to the directory that contains your conf file.
>> Have fun.
>> Regards,
>>  Andy
>>
>>
>>
>> On Sun, Dec 29, 2013 at 1:00 AM, demian sims <demiansims at gmail.com>wrote:
>>
>>> Hi Andy,
>>> Thanks for the reply.
>>>
>>> I figured out that the tables.conf.sample file has all the possible
>>> mounted drives in the file already.
>>>
>>> When I run ./kraken -indexes, I get this error:
>>>
>>> root at kali:~/kraken/Kraken# ./kraken -indexes
>>> Could not find -indexes/tables.conf
>>> kraken: Kraken.cpp:29: Kraken::Kraken(const char*, int): Assertion `0'
>>> failed.
>>> Aborted
>>>
>>> I also changed the name of the .conf file to just 'tables.conf' just in
>>> case but still the same error.
>>>
>>> Any ideas?
>>>
>>> D
>>>
>>>
>>> On Thu, Dec 26, 2013 at 11:11 PM, Andy Fuji <andyfuji88 at gmail.com>wrote:
>>>
>>>> Hi David,
>>>> We could use TableConvert.cpp instead.
>>>> Have fun.
>>>> Regards,
>>>> Andy
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> A51 mailing list
>>>> A51 at lists.srlabs.de
>>>> https://lists.srlabs.de/cgi-bin/mailman/listinfo/a51
>>>>
>>>>
>>>
>>
>> _______________________________________________
>> A51 mailing list
>> A51 at lists.srlabs.de
>> https://lists.srlabs.de/cgi-bin/mailman/listinfo/a51
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.srlabs.de/pipermail/a51/attachments/20140102/b54f702b/attachment.html>


More information about the A51 mailing list