[A51] Cracks beginning to show in A5/1...

demian sims demiansims at gmail.com
Thu Jan 2 05:31:12 CET 2014


Hi,

Looks I figured out the issue. the tables.conf file had some invalid Device
references. Once I deleted those everything works fine. I was able to get
the kraken> prompt!

thank you for your help in this.

Best,
D


On Wed, Jan 1, 2014 at 8:48 PM, Andy Fuji <andyfuji88 at gmail.com> wrote:

> Hi,
> to run Kraken, we should follow these steps:
> 1- edit conf file
> 2- execute Behemoth.py to generate index tables
> 3- run Kraken
> What have you done before running Kraken?
>
> Regards,
> Andy
>
> On Tue, Dec 31, 2013 at 11:51 AM, demian sims <demiansims at gmail.com>wrote:
>
>> Ok when I run ./kraken ../indexes I get the following error:
>>
>> Device: /dev/sda1 10
>> /dev/sda1
>> Device: /dev/sdb1 10
>> /dev/sdb1
>> Device: /dev/sdd1 10
>> /dev/sdd1
>> kraken: NcqDevice.cpp:15: NcqDevice::NcqDevice(const char*): Assertion
>> `mDevice>=0' failed.
>> Aborted
>>
>>
>> When I run fdisk -l I get the following output:
>>
>>    Device Boot      Start         End      Blocks   Id  System
>> /dev/sda1   *        2048    40136703    20067328   83  Linux
>> /dev/sda2        40138750    41940991      901121    5  Extended
>> /dev/sda5        40138752    41940991      901120   82  Linux swap /
>> Solaris
>>
>> WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util
>> fdisk doesn't support GPT. Use GNU Parted.
>>
>>
>> Disk /dev/sdb: 2000.4 GB, 2000365289472 bytes
>> 255 heads, 63 sectors/track, 243197 cylinders, total 3906963456 sectors
>> Units = sectors of 1 * 512 = 512 bytes
>> Sector size (logical/physical): 512 bytes / 512 bytes
>> I/O size (minimum/optimal): 512 bytes / 512 bytes
>> Disk identifier: 0x00000000
>>
>>    Device Boot      Start         End      Blocks   Id  System
>> /dev/sdb1               1  3906963455  1953481727+  ee  GPT
>>
>>
>>
>> On Mon, Dec 30, 2013 at 4:17 AM, Andy Fuji <andyfuji88 at gmail.com> wrote:
>>
>>> Hi,
>>> your command line should be "#./kraken ../indexes". The second parameter
>>> must be point to the directory that contains your conf file.
>>> Have fun.
>>> Regards,
>>>  Andy
>>>
>>>
>>>
>>> On Sun, Dec 29, 2013 at 1:00 AM, demian sims <demiansims at gmail.com>wrote:
>>>
>>>> Hi Andy,
>>>> Thanks for the reply.
>>>>
>>>> I figured out that the tables.conf.sample file has all the possible
>>>> mounted drives in the file already.
>>>>
>>>> When I run ./kraken -indexes, I get this error:
>>>>
>>>> root at kali:~/kraken/Kraken# ./kraken -indexes
>>>> Could not find -indexes/tables.conf
>>>> kraken: Kraken.cpp:29: Kraken::Kraken(const char*, int): Assertion `0'
>>>> failed.
>>>> Aborted
>>>>
>>>> I also changed the name of the .conf file to just 'tables.conf' just in
>>>> case but still the same error.
>>>>
>>>> Any ideas?
>>>>
>>>> D
>>>>
>>>>
>>>> On Thu, Dec 26, 2013 at 11:11 PM, Andy Fuji <andyfuji88 at gmail.com>wrote:
>>>>
>>>>> Hi David,
>>>>> We could use TableConvert.cpp instead.
>>>>> Have fun.
>>>>> Regards,
>>>>> Andy
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> A51 mailing list
>>>>> A51 at lists.srlabs.de
>>>>> https://lists.srlabs.de/cgi-bin/mailman/listinfo/a51
>>>>>
>>>>>
>>>>
>>>
>>> _______________________________________________
>>> A51 mailing list
>>> A51 at lists.srlabs.de
>>> https://lists.srlabs.de/cgi-bin/mailman/listinfo/a51
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.srlabs.de/pipermail/a51/attachments/20140101/3a521129/attachment.html>


More information about the A51 mailing list