[Gsmmap] OsmocomBB compilation in MacOS

Lukas Kuzmiak lukash at backstep.net
Sat Dec 31 15:52:58 CET 2011

Hi Felipe,

I've tried this before (like couple of months) and found there is some
problem with the serial port custom baudrates, I've managed to compile
osmocom after all but it wasn't working fine.

Does this setup you've described here capture the bursts alright?


On Sat, Dec 31, 2011 at 3:44 PM, Felipe Zimmerle <felipe at zimmerle.org>wrote:

> Hi,
> Maybe it is in the interest of others that are running MacOS, and wants to
> contribute with some data.
> Despite the fact that OsmocomBB does not officially support MacOS it can
> be compiled out of the box. To do so, make sure that you have MacOS Ports (
> http://www.macports.org) installed on your mac, then follow the steps:
> Follow the steps in: http://srlabs.de/gsm-map-tutorial/ making the
> following modifications:
> Replace the section "Download ARM cross compiler" by the command:
> sudo port install arm-elf-gcc
> Go to get some coffee or beer because this will take some time :)
> After finish, follow the rest of the steps until the "Compile OsmocomBB",
> in this section you don't need to export the path anymore. Simple, do not
> enter the export line, and you will be ok to continue.
> Note: do not try the MacOS version of arm compiler provided at gnuarm.com,
> not working on the newest version of MacOS.
> --
> F.
> _______________________________________________
> Gsmmap mailing list
> Gsmmap at lists.srlabs.de
> http://lists.srlabs.de/cgi-bin/mailman/listinfo/gsmmap
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.srlabs.de/pipermail/gsmmap/attachments/20111231/39beb514/attachment-0004.html>

More information about the Gsmmap mailing list