[Gsmmap] L1 - loads correctly? (corrected)

Luca Melette luca at srlabs.de
Thu Jan 12 19:12:23 CET 2012


On Thu, 12 Jan 2012 11:21:01 +0100
Dave Schmidt <dvsm89 at gmx.com> wrote:

> Hello again,

Hello Dave,

If after this:

> with burst_ind (and not working):
> ++++++++++++++++++++++++++++++++++++++++++++
> Finished, sent 49 blocks in total
> Received block ack from phone
> Sending checksum: 0x92 
> Checksum on phone side matches, let's branch to your code
> Branching to 0x00820000
> Received branch ack, your code is running now!
> ++++++++++++++++++++++++++++++++++++++++++++

you don't see this:

> OSMOCOM Layer 1 (revision )
> ======================================================================
> Device ID code: 0xb496
> Device Version code: 0x0000
> ARM ID code: 0xfff3
> cDSP ID code: 0x0128
> Die ID code: e5152505e5159b5f
> ======================================================================
> REG_DPLL=0x2413
> CNTL_ARM_CLK=0xf0a1
> CNTL_CLK=0xff91
> CNTL_RST=0xfff3
> CNTL_ARM_DIV=0xfff9
> ======================================================================

you are not ready to run any host code.

The problem is for sure related to your phone model.

(I didn't update the burst_ind branch for all the
possible osmocom mobiles)

Can you please tell me your model?

Cheers,

LM



More information about the Gsmmap mailing list